Use este identificador para citar ou linkar para este item:
http://repositorio.utfpr.edu.br/jspui/handle/1/37842
Título: | Análise técnica e estimativa orçamentária de fundações em sapatas e estacas pré-moldadas para uma edificação escolar |
Título(s) alternativo(s): | Technical analysis and budget estimation of foundations in footings and precast piles for a school building |
Autor(es): | Dalla Corte, Gregory Luiz |
Orientador(es): | Pelaquim, Flávia Gonçalves Pissinati |
Palavras-chave: | Fundações (Engenharia) Estacaria (Engenharia Civil) Concreto pré-moldado Foundations Piling (Civil engineering) Precast concrete |
Data do documento: | 23-Jun-2025 |
Editor: | Universidade Tecnológica Federal do Paraná |
Câmpus: | Pato Branco |
Citação: | DALLA CORTE, Gregory Luiz. Análise técnica e estimativa orçamentária de fundações em sapatas e estacas pré-moldadas para uma edificação escolar. 2025. Trabalho de Conclusão de Curso (Bacharelado em Engenharia Civil) - Universidade Tecnológica Federal do Paraná, Pato Branco, 2025. |
Resumo: | Inúmeras obras realizadas na esfera pública apresentam como premissa projetos padronizados, os quais têm como base a similaridade das estruturas envolvidas, inclusive das fundações, muito embora sejam alocados em perfis distintos. Estes projetos geram diversos questionamentos, tanto por parte da equipe de engenharia quanto dos setores públicos, de sua viabilidade técnica, orçamentária e estrutural. Deste modo, este trabalho tem por objetivo avaliar o viés técnico e orçamentário através da realização de um pré-dimensionamento das fundações de uma edificação escolar governamental utilizando as propostas padronizadas de sapatas e/ou estacas, considerando um estudo de caso na cidade de Coronel Vivida/PR. As sapatas foram pré-dimensionadas pelo método CEB-70 e estacas do tipo pré-moldadas com blocos de coroamento, pelos métodos Aoki-Velloso e Décourt-Quaresma. Após o pré-dimensionamento, foram obtidas as estimativas de orçamentos das respectivas soluções por meio das composições da Tabela SINAPI, onde foi possível observar variações significativas entre as propostas estudadas. A análise dos resultados possibilitou concluir que a execução por sapatas resulta num custo de R$63.639,80 e por estacas R$121.658,33, sendo então as sapatas 52% mais econômicas. |
Abstract: | Countless public buildings are based on standardized projects, which are based on the similarity of the structures involved, including the foundations, even though they are located in different profiles. These projects raise several questions, both from the engineering team and the public sectors, regarding their technical, budgetary, structural and environmental feasibility. Thus, this study aims to evaluate the technical and budgetary bias through the pre-dimensioning of the foundations of a government school building using standardized proposals for footings and/or piles, considering a case study in the city of Coronel Vivida/PR. The footings were pre-dimensioned by the CEB-70 method and precast piles with capping blocks, by the Aoki-Velloso and Décourt-Quaresma methods. After the pre-dimensioning, the estimated budgets of the respective solutions were obtained through the compositions of the SINAPI Table, where it was possible to observe significant variations between the studied proposals. The analysis of the results made it possible to conclude that the execution by footings results in a cost of R$63,639.80 and by piles R$121,658.33, with footings being 52% more economical. |
URI: | http://repositorio.utfpr.edu.br/jspui/handle/1/37842 |
Aparece nas coleções: | PB - Engenharia Civil |
Arquivos associados a este item:
Arquivo | Descrição | Tamanho | Formato | |
---|---|---|---|---|
analisetecnicaorcamentariafundacoes.pdf | 6,87 MB | Adobe PDF | ![]() Visualizar/Abrir |
Este item está licenciada sob uma Licença Creative Commons